Categories

Brands

MotoGadget Motoscope Pro

http://www.speedyshop.gr/img/p/8/1/0/5/8105-thickbox_default.jpg View full size

399,00 €

Add to cart

1 item in stock

5MGSCPRO

Warning: Last items in stock!

The motoscope pro is the most recent generation of motogadget's digital dashboard series.

Cutting edge technology enables us to create ultra-slim casing designs. 734 LEDs - governed by a 16-bit RISC processor - create an almost rimless, self-illuminating display matrix. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.




More details

The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.
 
Four indicator lights are pre-installed and can be used for far more input signals via the Breakout Boxes. The motoscope pro is equipped with a fully-fledged CAN-bus interface and thus ready for many of tomorrow's developments like for example the plug 'n ride Breakout-Box Triumph (please see tab 'Triumph' above).

The dashboard communicates over a proprietary digital one-wire bus (m-Bus) with additional Breakout Boxes to easily expand the application spectrum. This makes the dashboard highly versatile and makes application to a wide range of vehicles and tasks possible.

The billet aluminium casing is cnc-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE and does not have to be registered.

Please order the Breakout Box to connect indicator light signals (see Breakout Box Std.) or to connect digital bus-systems (Triumph, H-D) additionally. For BMW R9T a Breakout Box is not necessary.


Parts delivered

Instrument with ca. 55 cm connector cable

Speedometer sensor M5 x 0,5 fine-pitch thread (stainless steel, IP67) with ca. 150 cm connector cable

2 magnets

Push button mini

10 cable end connectors

In-line fuse

2 stainless steel screws

Detailed installation and operating instructions

Please note: Touch sensor not included anymore.

 

Specifications and features

Length, Height, Depth109 mm/ 47 mm/ 11 mm
Weight w/ cableapprox. 100 g
Mount2 x M3 threaded hole
Power consumption, operatingmax. 200 mA (load dependent)
Power consumption, standby0.4 mA (load dependent)
Operating voltage9 V - 15 V
Operating temperature-20°... +80°C
Rev counter (LED bargraph)
0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer
0 – 350 km/h or mph
Trip meter A
bis 999.9 km or mi
Trip meter B
bis 999.9 km or mi
Total mileage (adjustable)bis 250000 km or mi
Operating hours/Service0 – 9999.5 h
Clock23:59 h/min
Timekeeping0 – 99:59:59 h/min/s
RPM count (on LCD)0 – 20000 rpm
Adjustable RPM warning (gear shift flash)0 – 20000 rpm
On-board voltage9  – 18 V
Low voltage warningWarning if below ca. 11V
Timekeeping 0 - 100 km/h or 0 - 60 mph0.00 – 30.59 sec.
Actual accelleration+/- 0.00 – 1.50 G
Average speed0 – 350 km/h or mph
Max. speed0 – 350 km/h or mph
Max. RPM0 – 20000 rpm
Max. positive acceleration+1.50 G
Max. negative acceleration- 1.50 G
Gear displayN, gear 1 - 6
Green control LED (w/ breakoutbox A/B)Neutral (N)
Green control LED (w/ breakoutbox A/B)Turn indicator left/right
blue control LED (w/ breakoutbox A/B)High beam
Red control LED (w/ breakoutbox A/B)Miscellanious warning funktions
Fuel/Reserve (w/ breakoutbox A/B)0 - 100% w/ low warning
Air temperature* (w/ breakoutbox B)-20 - 80 °C / -4 - 176 °F w/ high/low warning
Water temperature* (w/ breakoutbox B)40 - 120 °C / 104 - 248 °F w/ high/low warning
Oil temperature* (w/ breakoutbox B)40 - 150 °C / 104 - 302 °F w/ high/low warning
Oil pressure* (w/ breakoutbox B)0 - 8 bar / 0 - 116 psi w/ high/low warning

 


    • MotoGadget Breakout box B for Motoscope Pro
      MotoGadget Breakout box B for Motoscope Pro
      All Motoscope pro indicator lights, temperature and oil pressure signal cables are connected to the msp Breakout Box B. Convenient screw-type terminals make child's play of the interconnections. Between the box and the Motoscope Pro just one cable is required. The Msp Breakout Box is moulded-in water proof and vibration-resistant.
       
      89,00 € Add to cart
    • MotoGadget Breakout box A for Motoscope Pro
      MotoGadget Breakout box A for Motoscope Pro
      All motoscope pro indicator lights cables are connected to the msp Breakout Box A. The compact dimensions facilitate hidden mounting of the box and the numerous cables connected to it anywhere on the vehicle. Between the box and the motoscope pro just one cable is required. The msp Breakout Box is moulded-in water proof and vibration-resistant.
       
      69,00 € Add to cart

No customer comments for the moment.

Write your review

Write your review

PayPal