Categorie

Brands

Home > Accessori>MotoGadget Motoscope Pro BMW R9T

MotoGadget Motoscope Pro BMW R9T

http://www.speedyshop.gr/img/p/7/8/8/3/7883-thickbox_default.jpg Vedi a schermo intero
Successivo

439,00 €

Aggiungi al carrello

1 articolo disponibile

5MGSCPROR9T

Attenzione: Ultimi articoli in magazzino!

The motoscope pro BMW R9Te only plug&ride instrument on the market.

The CAN-Bus interface of the motoscope pro enables the complete display of all original functions (except settings for heated grips). The original plug connector for the original wiring loom makes the instrument a real plug&ride solution and a very easy installation.

Maggiori dettagli

30 altri prodotti della stessa categoria:

A LED matrix display enables an ultra thin housing design. 734 LEDs, controlled by a 16-bit RISC processor - create an almost rimless, self-illuminating display. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.

The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.

Four indicator lights are pre-installed and can be used for far more input signals.

The billet aluminium casing is cnc-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE approval.



> Compatible with BMW RnineT Model 2014, 2015, 2016

Parts delivered

motoscope pro with ca. 70 cm connector cable, 2 stainless steel screws, detailed installation and operating instructions.

Please ask us for a matching bracket for the BMW R9T

Please note: Touch sensor not included anymore, Heated-Grip-Control may not work.

Specifications and features

Length, Height, Depth

109 mm/ 47 mm/ 11 mm

Weight

approx. 100 g

Mounting

2 x M3 threaded hole

Power consumption during operation

max. 200 mA (load dependent)

Power consumption in standby

0.4 mA

Operating voltage

9 V - 15 V

Operating temperature

-20°... +80°C

Rev counter (LED bargraph)

0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)

Speedometer

0 – 350 km/h or mph

Trip meter A

bis 999.9 km or mi

Trip meter B

bis 999.9 km or mi

Total mileage (adjustable)

bis 250000 km or mi

Operating hours/Service

0 – 9999.5 h

Clock

23:59 h/min

Timekeeping

0 – 99:59:59 h/min/s

RPM count (numerical)

0 – 20000 rpm

Adjustable RPM warning (gear shift light)

0 – 20000 rpm

On-board voltage

9  – 18 V

Low voltage warning

Warning if below ca. 11V

Timekeeping 0 - 100 km/h or 0 - 60 mph

0.00 – 30.59 sec.

Actual accelleration

+/- 0.00 – 1.50 G

Average speed

0 – 350 km/h or mph

Max. speed

0 – 350 km/h or mph

Max. RPM

0 – 20000 rpm

Max. positive acceleration

+1.50 G

Max. negative acceleration

- 1.50 G

Gear display

N, gear 1 - 6

Green control LED

Neutral (N)

Green control LED

Turn indicator left/right

blue control LED

High beam

Red control LED

Miscellanious warning funktions like Check Engine, ABS, low fuel

Fuel/Reserve

low fuel warning

    • MotoGadget Motoscope Pro
      MotoGadget Motoscope Pro
      The motoscope pro is the most recent generation of motogadget's digital dashboard series. Cutting edge technology enables us to create ultra-slim casing designs. 734 LEDs - governed by a 16-bit RISC processor - create an almost rimless, self-illuminating display matrix. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.
       
      399,00 € Aggiungi al carrello
    • MotoGadget Breakout box B for Motoscope Pro
      MotoGadget Breakout box B for Motoscope Pro
      All Motoscope pro indicator lights, temperature and oil pressure signal cables are connected to the msp Breakout Box B. Convenient screw-type terminals make child's play of the interconnections. Between the box and the Motoscope Pro just one cable is required. The Msp Breakout Box is moulded-in water proof and vibration-resistant.
       
      89,00 € Aggiungi al carrello
    • MotoGadget Breakout box A for Motoscope Pro
      MotoGadget Breakout box A for Motoscope Pro
      All motoscope pro indicator lights cables are connected to the msp Breakout Box A. The compact dimensions facilitate hidden mounting of the box and the numerous cables connected to it anywhere on the vehicle. Between the box and the motoscope pro just one cable is required. The msp Breakout Box is moulded-in water proof and vibration-resistant.
       
      69,00 € Aggiungi al carrello

Non ci sono commenti dei clienti per il momento.

Scrivi il tuo commento

Scrivi il tuo commento

PayPal